Specifications
ATEX Digital Beam Load Cell – Type BBLA
Special Features
- ATEX (Ex) load cell for Zone 1, 2, 21 and 22
- Robust capacitive technology
- Patented high reliability capacitive sensor
- High tolerance of up to 1.000 % overload
- Stainless steel
- Laser welded
- Hermetically sealed to IP68
- High accuracy, High resolution
- Digital filters
- Cable length up to 100 meters
- Calibration independent of cable length
- Load cell cable replaceable
- Easy mechanical and electrical installation
- Withstands welding voltages and ESD
- Optional load cell cable length of 10, 20, 50 or 100 meters
- The load cell type BBLA can be used in non-ATEX applications but for non-ATEX we suggest the load cell type SD
Technology
The robust digital load cell is based on a capacitive measurement principle where a non-contacting ceramic sensor is mounted inside the load cell body. As the load cell contains no moving parts and the sensor is not in contact with the load cell body, the load cell tolerates shocks, torsion, and very high overloads and sideloads. Therefore, the mechanical installation of the load cell can be done without expensive and complicated mounting kits and overload protection devices.
The electrical installation of the digital load cell is pure plug-and-play as the signal from the non-contacting sensor is directly converted, compensated and calibrated by a microprocessor to a digital load cell output in grams, kilograms, or Newton. Measurements and status codes are transmitted as RS485 data on a single wire coaxial cable (RG-58) which may be up to 100 meters long. The load cell cable can be replaced on-site if necessary.
The technology and mechanical design of the Eilersen load cells is covered worldwide by a number of patents.
Applications
· Dynamic weighing
· Process weighing
· Filling, batching, sorting and dosing equipment
· Vibration sorters
· Packaging machines
· Hopper scales
· Belt scales
· Conveyer scales
· Platform scales
· Big-bag equipment
· On-board vehicle weighing
Options
· ATEX (Zone 1, 2, 21, 22) version type BBLA
· ATEX II 2G Ex ia IIC T6
· ATEX II 2D Ex iaD 21 T85°C
· Mounting kit available
Specifications
Please download datasheet here
For 3D CAD files, click on the "Dimensions" link to the left of the picture and scroll down.
For prices or further information on our products, please use the contact form
Why choose Eilersen Load Cells?
