Interface Modules

Ensure reliable and fully digital communication between your load cells and your control systems with Eilersen interface modules. Combining Eilersen interface modules with our digital load cells provides the highest accuracy and resolution as there is no A/D conversion of the load cell signal. Our interface modules come with direct fieldbus interface or analogue I/O. Installation is plug-and-play, and the interface modules offer integrated diagnostics and monitoring of up to 16 individual digital load cells. Available in ATEX and IECEx versions.

ATEX and IECEx certified (zone 1, 2, 21, 22) PROFINET interface module for directly interfacing up to four digital ATEX / IECEx load cells via PROFINET. The interface module type 4X70A can also be used in non-ATEX installations

Type:

4170A, 4270A, 4370A, 4470A

Interface:

PROFINET

ATEX and IECEx certified (zone 1, 2, 21, 22) EtherCAT interface module for directly interfacing up to four digital ATEX / IECEx load cells via EtherCAT. The interface module type 4X60A can also be used in non-ATEX installations

Type:

4160A, 4260A, 4360A, 4460A

Interface:

EtherCAT

ATEX and IECEx certified (zone 1, 2, 21, 22) Profibus DP interface module for directly interfacing up to four digital ATEX / IECEx load cells via Profibus DP. The interface module type 4X35A can also be used in non-ATEX installations

Type:

4135A, 4235A, 4335A, 4435A

Interface:

Profibus DP

ATEX and IECEx certified (zone 1, 2, 21, 22) EtherNet/IP interface module for directly interfacing up to four digital ATEX / IECEx load cells. The interface module type 4X50A can also be used in non-ATEX installations.

Type:

4150A, 4250A, 4350A, 4450A

Interface:

EtherNet/IP

ATEX and IECEx certified (zone 1, 2, 21, 22) Modbus TCP/IP interface module for directly interfacing up to four digital ATEX / IECEx load cells. The interface module type 4X50A can also be used in non-ATEX installations

Type:

4150A, 4250A, 4350A, 4450A

Interface:

Modbus TCP/IP

Analog output weighing module featuring a LED display, 4-20mA or 0-10Vdc active analog output and digital EtherNet interface. The module also features four I/O for level alarms and remote zeroing. This module can directly connect to up to four digital load cells, and can be used for ATEX / IECEx and non-ATEX installations.

Type:

4179A, 4279A, 4379A, 4479A

Interface:

Analog output (4-20mA or 0-10Vdc active output) and Ethernet interface

ATEX and IECEx certified (zone 1, 2, 21, 22) RS485 interface module for directly interfacing up to four digital ATEX / IECEx load cells via RS485. The interface module type 4X40A can also be used in non-ATEX installations

Type:

4140A, 4240A, 4340A, 4440A

Interface:

RS485

ATEX and IECEx certified (zone 1, 2, 21, 22) DeviceNet interface module for directly interfacing up to four digital ATEX / IECEx load cells via DeviceNet. The interface module type 4X37A can also be used in non-ATEX installations

Type:

4137A. 4237A, 4337A, 4437A

Interface:

DeviceNet

ATEX and IECEx certified (zone 1, 2, 21, 22) power supply type 4051A used for supplying 4XXXA interface modules when used in ATEX / IECEx rated applications. The 4051A power supply and 4XXXA interface module must be installed in safe area i.e. outside the ATEX zone

Type:

4051A

Interface:

ATEX / IECEx power supply

RS485 interface module for interfacing digital load cells to PLCs, PCs etc. The module is developed for OEM use and can be equipped with customized protocols

Type:

4140OEM

Interface:

RS485

OEM weighing board for interfacing up to 8 digital load cells to PLCs, PCs etc. The board offers serial RS485, EtherNet and EtherNet IP interfaces. This weighing board is developed for OEM use and can be equipped with customized protocols. The board communicates weight, status and diagnostics for each individual load cell connected to the weighing board

Type:

5008OEM

Interface:

RS485, EtherNet TCP/IP, EtherNet IP, Modbus TCP/IP

OEM weighing board for interfacing up to 16 digital load cells to PLCs, PCs etc. The board offers serial RS485, EtherNet, EtherNet IP and EtherCAT/PROFINET (pending) interfaces. This weighing board is developed for OEM use and can be equipped with customized protocols. The board communicates weight, status and diagnostics for each individual load cell connected to the weighing board

Type:

5016OEM

Interface:

RS485, EtherNet TCP/IP, EtherNet IP, Modbus TCP/IP, EtherCAT/PROFINET (pending)

Profibus DP interface module for interfacing up to eight digital non-ATEX load cells via Profibus DP

Type:

MCE2035

Interface:

Profibus DP

PROFINET interface module for interfacing up to eight digital non-ATEX load cells via PROFINET fieldbus interface

Type:

2070

Interface:

PROFINET

Connection between Eilersen RS485 load cell bus at one side and 24Vdc Power Supply and Eilersen digital weighing terminals on the other side

Type:

MCE9601

Interface:

24Vdc supply and Eilersen RS485 load cell bus

Plug-and-Play Interface Modules

Eilersen interface modules provide the most accurate and reliable communication between your digital load cells and your PLC’s, SCADA, and control systems.

Our interface modules support all communication protocols on the market, including EtherNet IP, PROFINET, and EtherCat, and all our interface modules have direct fieldbus interfaces and analogue I/O.

 

Digital technology ensures accuracy and high resolution
When you combine Eilersen interface modules with Eilersen digital load cells, your measuring chain is purely digital. There is no loss of signal as there is no A/D conversion. As a result, you get the most accurate measurement and the highest resolution possible.

 

Standard or customized firmware
Like our digital load cells, Eilersen interface modules are plug-and-play for fast and easy installation. Our wide range of direct fieldbus interfaces makes our interface modules easy to connect to your existing PLC’s and control systems.

You can freely choose to have your interface modules delivered with our standard firmware or supplied with a customized version. As all our products are developed inhouse, our experienced developers can customize the firmware to suit your needs.

 

Monitor 16 load cells from one interface module
Our interface modules can monitor up to 16 digital load cells. The integrated monitoring provides data of loads on the individual digital load cells and even offer integrated diagnostics. Even though Eilersen load cells don’t require regular maintenance, this feature makes troubleshooting fast and easy should the need for maintenance occur.

 

Safe in every environment
No matter your industry or environment, we have interface modules and solutions to suit your needs. Eilersen interface modules are delivered in ATEX and IECEx certified versions that ensures safety and reliability under any conditions.